6
Assembly Instructions
Wall Mounted Water Bottle
Refilling Station
Connect Water Lines
• Connect the water line (#2) in the Bottle Filler
Top Assembly to the Water Control Valve (#2)
in the Cooling System.
• Push line until locked into place.
Connect Wire Connectors
• Connect white Activation Connector (C) to
Power Supply (C) in the Cooling System.
Attach stainless steel pan
• Feed the Reset Button Connection through
the Cooling System's frame and carefully
lower the Stainless Steel Pan on top of the
Cooling System.
• Attach the Stainless Steel Pan to the
Cooling System using (2) H4 screws.
CAUTION
Avoid crossing wires
against sharp edges
7A
7C
7B
H4
Reset Button
Connection
Reset Button
Connection
b82045fc-0b136962-90871f19-f891407c
