Glenmac Harley T6, Operator'S Manual

Page: 8 / 40

6 PN-P970612 (06/2005)
Metric Series Torque Chart
Use only metric tools on metric hardware. Other tools may not fit properly. They may slip and cause injury.
DO NOT use these values if a different torque value or tightening procedure is listed for a specific application.
Torque values listed are for general use only.
Fasteners should be replaced with the same grade.
Make sure fastener threads are clean and you properly start thread engagement. This will prevent them from failing
when tightening.
After every ten (10) hours of operation, check all hardware and tighten where required.
Safety is a primary concern in the design and
manufacture of our products. Unfortunately, our
efforts to provide safe equipment can be wiped out by
a single careless act of an operator.
In addition to the design and configuration of
equipment, hazard control and accident prevention are
dependent upon the awareness, concern, prudence, and
proper training of personnel involved in the operation,
transport, maintenance, and storage of equipment.
It has been said, “The best safety device is an informed,
careful operator.” We ask you to be that kind of an
operator.
The designed and tested safety of this equipment
depends on it being operated within the limitations as
explained in this manual.
TRAINING
•
Safety instructions are important! Read all
attachment and power unit manuals; follow all
safety rules and safety decal information.
(Replacement manuals are available from dealer
or, in the United States and Canada, call 1-800-
437-9779.) Failure to follow instructions or safety
rules can result in serious injury or death.
•
If you do not understand any part of this manual
and need assistance, see your dealer.
•
Know your controls and how to stop engine and
attachment quickly in an emergency.
•
Operators must be instructed in and be capable of
the safe operation of the equipment, its
attachments, and all controls. Do not allow anyone
to operate this equipment without proper
instructions.
BOLT TORQUE CHART
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
SAFETY RULES