Glenmac Harley T6, Operator'S Manual

Page: 11 / 40

9 PN-P970612 (06/2005)
MAINTENANCE SAFETY
•
Your dealer can supply original equipment,
hydraulic accessories and repair parts. Substitute
parts may not meet original equipment
specifications and may be dangerous.
•
Always wear relatively tight and belted clothing to
avoid entanglement in moving parts. Wear sturdy,
rough-soled work shoes, and protective equipment
for eyes, hair, hand, hearing, and head.
•
Before dismounting tractor or performing any
service or maintenance, disengage power to
implement, lower the 3-point hitch and all raised
components to the ground, operate valve levers to
release any hydraulic pressure, stop engine, set
parking brake, remove key, and unfasten seat belt.
•
Lower implement to ground or block securely, turn
tractor engine off, remove key, and disconnect
driveline from tractor PTO before performing any
service or maintenance.
•
Do not allow other people in the area when
operating, attaching, removing, assembling, or
servicing equipment.
•
Do not modify or alter, or permit anyone else to
modify or alter, the equipment or any of its
components in any way.
•
Never go underneath equipment lowered to the
ground or raised. Never place any part of the body
underneath equipment or between moveable parts
even when the engine has been turned off.
Hydraulic system leak-down, hydraulic system
failures, mechanical failures, or movement of
control levers can cause equipment to drop or rotate
unexpectedly and cause severe injury or death.
•
Service work does not require going underneath
equipment.
•
Read Operator’s Manual for service instructions
or have done by a qualified dealer.
•
Ensure implement is properly attached, adjusted,
and in good operating condition.
•
Never perform service or maintenance with engine
running.
•
Keep all persons away from operator control area
while performing adjustments, service, or
maintenance.
•
Tighten all bolts, nuts, and screws to torque chart
specifications. Check that all cotter pins are
installed securely to ensure equipment is in a safe
condition before operating.
•
Ensure all safety decals are installed. Replace if
damaged. (See “Safety Decals” section for
location.)
•
Ensure shields and guards are properly installed
and in good condition. Replace if damaged.
•
Do not disconnect hydraulic lines until all system
pressure is relieved. Lower unit to ground, stop
engine, and operate all hydraulic control levers.
STORAGE
•
Follow manual instructions for storage.
•
Keep children and bystanders away from storage
area.
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
SAFETY RULES
Review the video
included with
your Rake for
safety tips!