Glenmac Harley T6, Operator'S Manual

Page: 5 / 40

3 PN-P970612 (06/2005)
SPECIFICATIONS
Raking Width ............................................................................................................... 72 Inches
Roller Type .......................................................................... Tooth Roller Standard 9" Diameter
Roller Angle .................................................................................... 15 Degrees Both Directions
Gap (Tube to Barrier) ................................................................................. 5/16" - 3" Adjustable
Tires .......................................................................................................................... 16.5 x 6.5-8
Tire Pressure ......................................................................................................................60 psi
Weight ............................................................................................................................... 840 lbs
Oil Capacity of Chain Case .................................................................. Approximately 1.5 Pints
Tractor Three-Point Attachment ....................................................................................... Cat. 1
3-Point Lift Requirement at 24" 903 lbs
PTO Drive ................................................................................................................... 540 RPM
Tractor Hydraulic System ..................................................... 3-Pt Hitch and One Remote Valve
Tractor PTO HP ........................................................................................................ 22 - 35 HP
OWNER ASSISTANCE
1. We at Glenmac, Inc. and your authorized Harley dealer want you to be completely satisfied with your investment.
Sometimes, however, misunderstandings can occur. To resolve any problems that may occur please follow the
instructions below. If you did not purchase your Power Box Rake
®
from an authorized Harley dealer, go to
number (2) below.
A. Contact the Service Manager of the dealership, explain the problem, and request assistance. If
additional assistance is needed, your dealer had direct access to our home office.
B. If your problem has not been handled to your satisfaction contact:
Customer Service (8:00 am – 5:00 pm Central Time)
Glenmac, Inc.
P.O. Box 2135
Jamestown, ND 58402-2135
(701) 252-9300
C. Please be prepared to provide the following information:
•
Your name, address, and telephone number,
•
Machine model and SERIAL NUMBER ,
•
Dealership name and address,
•
Machine purchase date,
•
Nature of problem.
Your problem will likely be resolved in the dealership using the dealer’s facilities, equipment, and personnel.
Therefore, it is important that your initial contact be with the dealer.
2. If you did not purchase your equipment from an authorized dealer, call Glenmac, Inc. (see B above); there may
be a new dealer in your area since you purchased your
Power Box Rake
® . If there is no dealer in your area, our
Customer Service Department can and will help you obtain the parts and information you may need. Please be
prepared to provide the information requested under C above.