700-OM-UK-001 v1.0
–
09 Jul 2020
Need assistance? +44 (0)1379 658300 [email protected]
Page 8 of 17
Thermostat (Optional)
The thermostat offers control of the product to regulate the temperature within the building. For security reasons, when the property
is unoccupied, the thermostat should be switched off and the product closed.
External Keypad (Optional)
The keypad option offers secure access into the product from the outside via a numerical pass code. To open or close the product,
enter the four-digit numerical code and press the # key (Glazing Vision supplies an initial code with the product and instructions for
changing it as required). Unlike the standard
internal wall switch, the keypad does not offer ‘press and hold’ operation. The keypad
is mounted on the side of the product.
Figure 6
–
External keypad
External Key Switch (Optional)
The key switch option offers the same function as the keypad but via a key operated switch. In addition, the key switch does offer
‘press and hold’ operation. To open the product, turn the key in a clockwise direction. To close the product, turn the key in
an anti-
clockwise direction.
Figure 8
–
External key switch
Battery Backup (Optional)
The battery backup supply provides an uninterruptable power source (24V DC) in the event of a mains power failure. It houses a 24V
power supply, an Uninterruptable Power Supply (UPS) switch and two 5Ah batteries. This will allow full operation of the product for
a limited period in the event of a power failure. The battery backup will resume normal operation once mains supply is restored.
The battery backup is protected with a 15A breaker switch. Please note that mains power must be applied to the UPS before the DC
output is activated. Product use should be kept to a minimum during mains failure to maintain battery efficiency.
Figure 9
–
Battery backup supply
Building Management System Integration (Optional)
The product can be connected to building management systems. Please contact Glazing Vision for further details if required.
