Glamox CT Series, User Manual

Page: 12 / 48

12
1 2 3 4 5
1 2 3 4 5
SELECT! 00:00
ON OFF
SATISFIED ?
NO YES
START-TIME --:--
CHANGE OK
STOP-TIME --:--
CHANGE OK
MORE CYCLES ?
NO YES
MORE DAYS?
NO YES
SATISFIED ?
NO YES
SAVED !!
MORE ZONES?
NO YES
SELECT CYCLE. A column chart with 24 columns appears, one for each hour of
the day. The first column is flashing and represents the first hour of the day, from
00:00 to 01:00. As an aid, the column for every sixth hour is taller, i.e. 05:00–06:00,
11:00–12:00, 17:00–18:00 and 23:00–00:00. By pressing the option keys under ON
or OFF on the display, you choose whether the relay is to be switched on or off for the
hour 00:00–01:00. This procedure is repeated for each of the 24 hours. The start time
for each hour is displayed, and the column flashes. If you desire times other than whole
hours, you may jump forwards in 15 minute increments by pressing the key.
SATISFIED? The column chart shows the day’s cycle, with low columns representing
when the relay is switched off and tall columns when it is switched on. When all 24
hours have been programmed with either ON or OFF, you will be asked if you are fin -
ished. Confirm by pressing YES. If you made a mistake in the programme, simply press
NO and the cycle may be set again. The example shows ON for the periods 05:00–08:00
and 15:00–23:00.
Type in the STOP-TIME for the period with ON. Confirm with OK.
Type in the START-TIME for the first ON period. Confirm with OK. NB! If you type
in periods that overlap, they will be stored as one long period with the earliest and latest
times as the start and stop times. To avoid such overlapping, it is a good idea to jot down
the desired times before they are entered.
MORE CYCLES? If further periods with the relay ON are desired, press YES. You may
then set the start and stop times for a new period with the relay switched ON.
SATISFIED? If you are satisfied with the programming, press YES. If not, press NO
and the cycle may be set again.
MORE DAYS? All the days of the week must be programmed if they are to have a daily
cycle. Days that are not programmed will automatically be set to OFF (default) for the
whole day. If you press YES, you will return to SET DAY(S).
SAVED! The moment you confirm that do not wish to programme any more days for the
zone in question, SAVED! is displayed, and the zone is now programmed.
MORE ZONES?
Finally you are asked if you wish to programme other zones. Choose with YES or NO.
Pressing NO leads you back to the start MENU. Pressing YES will allow you again to
choose HEATING or RELAY zones.