Glamox CT Series, User Manual

Page: 9 / 48

9
1 2 3 4 5
1 2 3 4 5
ºC NORMTEMP 5-35
22 OK
ºC SAVETEMP 5-30
17 OK
SELECT! 00:00
22 ºC 17ºC
SATISFIED ?
NO YES
START-TIME --:--
CHANGE OK
STOP-TIME --:--
CHANGE OK
MORE CYCLES?
NO YES
Select normal temperature. The default setting, 22°C, is suggested. Type in another
number if you desire a different temperature. Confirm with OK.
Select economy temperature: 17°C appears as the suggested setting. Type in another
number if you desire a different temperature. Confirm with OK.
SELECT: A column chart with 24 columns appears, one for each hour of the day. The
first column is flashing and represents the first hour of the day, from 00:00 to 01:00. As
an aid, every sixth hour is displayed taller, i.e. 05:00–06:00, 11:00–12:00, 17:00–18:00
and 23:00–00:00. By pressing the option keys under 22°C or 17°C on the display, you
choose whether the hour from 00:00 to 01:00 is to set at normal or economy tempera-
ture. Start heating at normal temperature about an hour before the room comes into
use. Similarly, make a setting for all 24 hours. The start time for the hour in question
is displayed and the column flashes. If you desire times varying from whole hours, you
may jump forwards in 15 min. increments using the key.
SATISFIED? The column chart shows the day’s cycle, with low columns representing
when economy temperature is set and tall ones when normal temperature is maintained.
When all 24 hours have been programmed with either normal or economy temperature,
you will be asked if you are finished. Confirm by pressing YES. If you made a mistake
in the programme, simply press NO and the cycle may be set again. The example shows
normal temperature for the periods 05:00–08:00 and 15:00–23:00.
Type in the START TIME for the first period of normal temperature. Confirm with OK.
NB! If you type in periods that overlap, they will be stored as one long period with the
earliest and latest times as the start and stop times.
To avoid such overlapping, it is a good idea to jot down the desired times before you
enter them.
Type in the STOP-TIME for the period of normal temperature. Confirm with OK.
MORE CYCLES? If further periods with normal temperature are desired, press YES.
You may then set the start and stop times for a new period with normal temperature.