Glamox CT Series, User Manual

Page: 17 / 48

17
CHANGE
TEMP CYCLE
ºC NORMTEMP 5-35
22 OK
ºC SAVETEMP 5-30
17 OK
SAVED !!
CHANGE CYCLE
NO YES
PROGRAMME-TYPE
TIME COLUMN
SELECT! 00:00
21 ºC 17ºC
SATISFIED ?
NO YES
SAVED
Now you may choose to change either the temperature settings or the daily cycles.
NORMTEMP. Set normal temperature: The default setting is 22°C and appears as a
suggestion. Type in other figures if you desire a different temperature. Confirm with
OK.
SAVETEMP. Set the economy temperature: The default setting, 17°C, appears as a sug -
gestion. Type in other figures if you desire a different temperature. Confirm with OK.
You may now go on to alter the times.
When the new temperature settings are saved, you will be asked if you wish to repro-
gramme the times. Press NO and you return to review your last alteration. Press YES
and you go to...
Set the daily cycle. A column chart with 24 columns appears, one for each hour of the
day. The first column is flashing and represents the first hour of the day, from 00:00
to 01:00. As an aid, every sixth hour is shown taller, i.e. 05:00–06:00, 11:00–12:00,
17:00–18:00 and 23:00–00:00. By pressing the option keys under 22°C or 17°C on the
display, you SELECT whether the hour from 00:00 to 01:00 is to be set at normal or
economy temperature. Start heating at normal temperature about an hour before the
room comes into use. Continue to make a setting for all 24 hours. The start time for the
hour in question is displayed and the column flashes. If you desire times varying from
whole hours, you may jump forwards at 15 min. increments using the key.
SATISFIED? The column chart shows the day’s cycle, with low columns representing
when economy temperature is set and tall ones when normal temperature is maintained.
When all 24 hours have been programmed with either normal or economy temperature,
you will be asked if you are finished. Confirm by pressing YES. If you made a mistake
in the programme, simply press NO and the cycle may be set again. The example shows
normal temperature for the periods 05:00–08:00 and 15:00–23:00. When you confirm
with YES, all changes are stored and you can move on.
After SAVED you arrive again at NEXT or CHANGE. Go to the NEXT day or quit
with AUTO.