USER MANUAL
DIGITAL READOUT VISION 518
MT02_A31_B_VI518_GIVI_ENG rev. A
Pag. 21/32
With this function, it is possible to set the intervention of two relays during machining. This
will occur in correspondence of some positions set during programming (see function
F 42). When reaching the positions, the relays (if enabled) switch their status, opening or
closing a contact.
This function can be activated and executed only if the instrument has been required with
this option. Vice versa, the operator should contact the Manufacturer.
To activate the function,
Press
4 0
r E L E no
Press
to modify the setting
r E L E yes
Press
to confirm the selection.
St1 no
On the display it is possible to see the status of relay 1 in rest condition (position not
reached) according to this definition:
NO
= NORMALLY OPEN CONTACT
NC
= NORMALLY CLOSED CONTACT
Press
to modify the setting
St1 nc
or
to confirm the selection.
St2 no
The display will then propose the selection of relay 2. Proceed as described above.
RELAY OUTPUTS ACTIVATION
F 40
