USER MANUAL
DIGITAL READOUT VISION 518
MT02_A31_B_VI518_GIVI_ENG rev. A
Pag. 10/32
Example:
Press
r E F
The display flashes and requires the operator to perform the zero reference (REF) search.
With this function, it is possible to set the 0 value in correspondence to the zero reference
position. In order to reset the absolute and incremental counters:
Press
r E F
The axis display flashes. By passing with the carriage on the corresponding point, the 0
value will be displayed.
The instrument will not accept any setting until the axis has terminated the zero
reference (REF) search, displaying an error message at the pressure of any key
(except CLR). The operator can then decide to:
A) Complete the zero reference search;
B) Cancel it because unnecessary.
ABSOLUTE (SSI) ENCODER INPUT
In the instruments with absolute (SSI) encoder input, the zero reference search function
allows to synchronize the displayed position and the absolute position of the encoder.
Press
1
2
3
.
4
5
The absolute position of the encoder will be displayed.
A general test of the instrument is performed automatically whenever it is turned on,
checking the validity of the stored data. If no problem is detected, the following wording will
appear on the display:
tESt
no
Err
SELF-TESTING
