Girard Systems GG750, Service And Repair Manual

Page: 36 / 49

(Figure 13)
D. TESTING THE MOTION SENSOR (Wind Sensor)
1. Partially extend the awning (at least 3 feet).
2. Physically activate the motion sensor by shaking the awning lead rail.
3. At this point the awning should retract; if not, check that there is a 12VDC supply
to the motion sensor and that the motion sensor is correctly programmed.
NOTE: The Motion sensor will send a retract signal to the motor of the awning it is
programmed to on the RV. If there are multiple awnings extended that begin to retract
Page 30 of 49
Page 30 of 49
Page 30 of 49
Page
3 6
of
49