40
Using the RackControl in “Manual” mode
If the program set is to be saved, RackControl can be used in manual mode�
However, in this mode specific plates cannot be memorised by the generic
name “Tray” is displayed for all levels�
2.13 Using the EasyService function in RackControl
RackControl is designed to cook the dishes separately on distinct levels� The
servings can be introduced at the same time or different times as the times
expire, the oven informs which level it has reached at the end of cooking�
By activating the EasyService function, it
is possible to have all of the dishes ready
at the same time� In this way, the oven
informs when it is necessary to insert the
servings at the various levels in a way
that they are ready at the same time�
In this way only levels with the time
parameter setting can be selected (not
with the core probe parameter)�
Activate EasyService
The EasyService function must be
activated before pressing the START
button; in fact, it is only available when
the oven is in STOP mode�
To activate EasyService, move the
EasyService switch (
ref. 33
) to position
l
�
This action allows access to the list of dishes
of the relative RackControl program� Select
he dishes to be served at the same time
(maximum 10) and press the START button�
After having terminated pre-heating (if
present), the oven informs to enter the dishes with the longest cooking time�
The warning takes place via an acoustic signal and the wording “IN” in the
right hand box� With the opening and closing of the door, the acoustic signal
is reset and the countdown begins�
In the other levels, the residual time to placing in the oven is highlighted
in green� The oven warns when the other servings must be placed in the
oven in the same way� The acoustic warning starts in an intermittent manner
starting from -15 seconds� It is recommended to wait until the timer reaches
0 and the wording “
IN
” is displayed before placing in the oven� In this way,
O
I
START
1
2
3
4
5
6
7
8
9
10
EasyService
O
I
250°
32
A-La-Carte
Lunch
Friday, 30 October 2015
16:20
