9
in the electric table . Then fit a standard plug rated for the load absorbed
onto the power cable and plug into a suitable socket after making sure
that the socket is properly earthed in accordance with current standards�
For a direct connection to the mains it is necessary to interpose a 4-pole
switch between the unit and the mains, rated for the load and with
contacts that have a minimum opening distance of 3 mm�
When the unit is running check
that the supply voltage is ±
10% of the rated voltage value�
In addition, the unit must be
connected to an equipotential
system which must be checked
following the guidelines of the
current regulations�
2. INSTRUCTIONS FOR HI-LITE MODELS
The unit should only be used for the designated purpose� Any other use
is improper� Do not leave appliance unattended when in use�
2.1 Starting
This unit is designed for cooking, warming,
grilling and keeping food hot with high
temperature infrared rays produced by a
heat source located in the top of the unit�
By adjusting the grill hood height, it is
possible to regulate the heat on the food
to be cooked� The greater the distance
between the food and the heating element
the lower the heat intensity�
Fig. 3
MOD
XXXX
NR
XXXXXX/XX/XX
POWER SUPPLY
xxxV xN xx/xx Hz
TOT POWER kW
XX
IP
Fig. 4
Fig. 5