17
SETTING A PROGRAM
Switch on the appliance by pressing the ON/OFF button
Hold down the desired program button (P1 or P2 or P3) until the display
starts flashing
Set the cooking or hold mode by pressing the SELECT/MODE button,
then set the time using the + and - buttons
If the cooking mode has been selected it is possible to set a hold mode
session at the end of the cooking session by pressing the SELECT/MODE
button immediately after setting the time and then setting the heat
intensity from 1 to 8� You can save the program by pressing the button
again� If you press the program button again without setting a hold mode
session first, the cooking session only will be saved.
SWITCHING OFF
After use switch off appliance using ON/OFF switch and omnipolar switch
upstream of appliance�
5. CLEANING AND MAINTENANCE
5.1 Routine Maintenance
At the end of each working day the unit must be cleaned both for reasons
of hygiene as well as to prevent malfunctions�
Disconnect the unit from the electricity supply before starting�
Clean all stainless steel parts with warm, soapy water, rinse thoroughly
and dry with care� Do not use products containing chlorine (e�g� bleach)�
Do not clean the unit with jets of water or high pressure water� Do not
use metal cleaning pads, brushes or scrapers made of ordinary steel� If
necessary, use stainless steel wool, rubbing in the direction of the satin
finish.
If the unit is left unused for any length of time, apply a thin protective
layer of Vaseline oil over all stainless steel parts with a cloth; ensure that
the room is regularly aired as well�