2. Safety & Warning
3.1 Screen
Solis RHI-HV series has a 7 inch color screen that displays the status,
operating information, and settings of the inverter.
3. Overview
WARNING:
The RHI series does not support parallel (three- and single-phase) operation
on the AC-BACKUP port. Parallel operation of the unit will void the warranty.
1 Phase LOAD
3 Phase LOAD
× × ×
2.3 Notice For Use
The inverter has been constructed according to the applicable safety and technical
guidelines. Use the inverter in installations that meet the following specifications ONLY:
1. Permanent installation is required.
2. The electrical installation must meet all the applicable regulations and standards.
3. The inverter must be installed according to the instructions stated in this manual.
4. The inverter must be installed according to the correct technical specifications.
.6.
.7.
×
×
3.2 Keypad
There are four keys on the front panel of the inverter (from left to right):
ESC, UP, DOWN and ENTER. The keypad is used for:
Scrolling through the displayed options (the UP and DOWN keys);
Access and modification of settings (the ESC and ENTER keys).
Figure 3.1 Keypad
Solis RHI series inverter is different from a normal grid-tied refer inverter, please refer
the instructions below before initial connection.
3.3 Terminal Connection
Figure 3.2 Front Panel Display
Vent
AC
-
BACKUP
Meter
COM2
Commnication
BAT
DC
BMS
WARNING:
Operations below must be accomplished by licensed technician or Solis
authorized person.
WARNING:
AC-BACKUP of RHI-HV series is forbidden to connect to the grid.
AC
-
GRID
RSD E-STOP
