GIMA SpA
MT PROFESSIONALE
Manuale d’istruzioni / Instruction’s Manual
MA128IGBa
25
OPERATIONAL INSTRUCTIONS
--Inspect the package to remark possible serious damages due to the carriage. If you find
damages warn the supplier and the carrier before light the unit.
--Connect the mains cable to the connector set on the back panel of the unit and, after have
verified that the mains corresponds to those labelled in the unit, plug the unit to the mains net
that has to be provided with earth protection or at least protected through automatic differential
switch conforming the safety requirements.
--Put the magnetic field generating transducers on the treatment area and assure them by a band.
One transducer alone can be used if retained sufficient.
--Connect the transducers to the appropriated connectors on frontal panel.
--Light the unit by the "POWER" mains switch.
When lighted the unit predispose the treatment time, the magnetic field repetition frequency and
the field intensity percentage to the values previously pre-set before switching off the unit after
the previous use. If the currently desired parameters are different from those suitable to the
lighting:
-- Predetermine the desired treatment time by means of the b and - in the timer section.
-- Select the desired working frequency by means of the b and- in the "FREQUENCY"
section.
--Select the desired magnetic field intensity percentage by means of the buttons and- in the
"INTENSITY" section.
--Select the channels to activate by means of the button "MODE"
--Start the treatment by means of the "START" button in the timer section located on the left
zone of the frontal panel.
--When the pre-set treatment time has elapsed, the generation of the magnetic field by the unit
will automatically stop. If during a session it wants interrupt the treatment temporarily, it needs
to press the button "STOP" in the timer section; to resume the treatment press the button
"START": the treatment will go on up to the pre-set time attainment noting the elapsed time
before the interruption. If one desire interrupt a treatment in course definitely, press twice
consecutively the button "STOP" in the timer section.
If the pre-set treatment time is 00 the treatment once on can be terminated only by hand
pressing twice the button "STOP" in the timer section, this allows to effect treatments with
application time exceeding 99 minutes.