GIMA spa
DIATERMO MB240 – DIATERMO MB380
Manuale d’ Istruzioni / Instruction’s Manual
MA129IGBg
35
4.2 REAR PANEL
1 VENTILATION SLOT
5 FUSE HOLDER / VOLTAGE SELECTOR
2 PROTECTION AGAINST ESD
6 BIPOLAR HIGH FREQUENCY AMPLIFIER MODULE
3 MAINS MECHANICAL SWITCH
7 MONOPOLAR HIGH FREQUENCY AMPLIFIER MODULE
4 MAINS INPUT CONNECTOR MODULE
4.2.1
E
QUIPMENT
M
AINS
I
NPUT
M
ODULE AND
V
OLTAGE
S
ELECTOR
.
The equipment mains input module provides the connection point for the power for the equipment's internal electronics.
The mains input module incorporates the mains input socket, the main input voltage selector and in-line mains fuses.
WARNING:
Before the unit is powered up the operator should check that the mains input voltage indicated on the power
input module corresponds to the mains voltage supply to which it is to be connected, and that the correct mains fuse type for
the selected mains voltage has been inserted.
4.2.2
P
OWER
O
N
-O
FF
M
ECHANICAL
S
WITCH
The POWER ON/OFF mechanical switch is used to control power to the equipment. To power the equipment, press the
switch in the direction of the 1 ( i.e. left part). When the equipment is powered, the light inside the power on-off mechanical
switch and the READY red Led on the right side of the front panel will illuminate. Pressing the switch in the 0 direction will
cut power to the equipment, this operation allows it to be used as a emergency stop switch, in the event of any fault. When
the equipment is powered can be switched-on by the mains electronic switch located on the front panel.