22
Loading printer paper:
Step 1: press and hold down the cartridge button to open the paper cartridge.
Step 2: Install the paper to the printer properly, pull the paper out of the printer for 2 cm, as shown in figure
3.13.
Step 3: Close the printer cover along the direction of arrow, as shown in figure 3.13.
Figure 3.13 printer paper
Chapter 4
OPERATIONS
This chapter introduces the display screen and operating instructions, including the initial screen, default scre-
en, system menu, menu setup and data upload. Before operating the Gima Vital Signs Monitor, please refer to
the related section for connecting the accessories.
Note:
The monitor you purchased may not cover all the mentioned functions according to its configuration.
4.1 Initial Monitoring Screen
To switch on the Gima Vital Signs Monitor, press and hold the power key. When you hear a “beep”, the
LCD will display as shown in figure 4.1, which means that the monitor has started successfully
Figure 4.1 Startup screen
A short press of the power key will switch between power saving modes and full power mode. Power
saving modes mean the LED and LCD display become darker, the brightness has two levels.
A long press of the power key will give a black screen as the displays turn off and means that the Gima
Vital Signs Monitor has shut down successfully.
4.2 Default Screen
When the Gima Vital Signs Monitor is powered on, the default display screen is as shown in figure 4.2.