21
3.4.5 Loading printer paper (if printer is installed)
Operation procedures for loading printer paper:
1. To open the printer cover, press two thumbs firmly on both “OPEN” notches.
2. Move the tab of the left rubber roller lock 90°upwards to unlock it, refer to the following figure with mark .
3. Cut one end of the paper into a triangle, and load the paper from the underside of the rubber roller.
4. Turn the roller clockwise to roll the paper rolled, and put the paper roll into the compartment.
5. Pull the paper out of the paper slot on the shield.
6. Move the tab of the rubber roller lock 90° downwards to lock it.
7. Put the shield back in position and secure it.
Operation procedures for taking out printer paper roll:
Steps 1~2: Same as above.
Steps 3. Roll the loading roller anti-clockwise and pull the paper out.
Steps 4~5: As steps 6~7 above.
Figure 3.12 Loading and taking out printer paper
P8 printer may be used due to the different configuration
P8 printer operation instruction:
Power indicator:
green light shows the power is on, when the Gima Vital Signs Monitor is out of power, the
green light is off.
Error indicator:
red light which shows the printer is out of paper or the printer paper is not properly installed.
When the printer successfully installs, the red light is off.
Figure 3.12 P8 printer
Power Indicator
Paper cartridge
Error Indicator
Open button
