*Note!
Do not inflate the cuff until it is wrapped around your arm.
After all symbols disappear, the display will show “00”.
The monitor is “Ready to Measure” and will automatically
inflate to the level that is right for you.
C. After inflation of the cuff, the pressure will slowly decrease.
When pulse is detected, PULSE SYMBOL
flashes.
*N.B.!
• If the cuff does not stop inflating, remove the cuff at once.
• To stop measurement, press
button.
D. LCD screen displays your systolic rate, diastolic rate,
pulse, Risk Category Indicator Bar, and Irregular Heartbeat
Detector symbol with date and time for 1 minute.
E. Without any operation for 1 minute, device automatically
shuts off.
MEMORY FUNCTION
Storing data
After each measurement, the systolic and diastolic pressure, heart rate with date and time
will be automatically stored.
The monitor can store 120 memories total for 3 users, and automatically replace the oldest
data with new one.
Recalling data
A. Press
+
button to select User 1, 2, or 3.
B. Press M button to enter Memory Mode. LCD displays av-
erage of last 3 measuring results first.
C. Press M button again, LCD displays the latest measuring
result. Keep pressing M button, user can scroll through
following measurements in sequence.
D. To stop reading memories, press
button, and switch
to Standby Mode.
32
ENGLISH
