background image

17

7. Since neither the device nor batteries are household waste, follow your local recycling rules and dis-

pose them at appropriate collection sites.

TROUBLESHOOTING

.

SPECIFICATIONS

Model: Domino

Size: 158(L) ×120(W) ×127(H)mm

Weight: Approximately 490g without batteries

Measuring method: Oscillometry

Measuring range: 40 to 260 mmHg (blood pressure); 40 to 160 beats/minute (pulse rate)

Measuring accuracy: ± 3 mmHg for systolic and diastolic pressure; 

± 5% of the reading for the pulse rate

Inflation: Automatic by the pump

Rapid deflation: Automatic electronic valve

Batteries: 4“AA”×1.5V

Adapter: Optional component, 6V, 600mA

Memory: 2×60 sets of memories

Operation temperature and humidity: +10. to + 40, 85% and below

Storage temperature and humidity: -20. to + 50, 85% and below

Cuff size: Applicable for arm size 22-32 cm

Complete  kit:  Main  body,  storage  case,  cuff,  4×AA  batteries  (Optional),1xCR2025  button  battery, 

adapter (Optional), instruction manual 

SYMPTOM

CHECK POINT

REMEDY

No display when the 

START button is pres-

sed.

The batteries have run down.

The polarity of battery is wrong.

The contact of battery compart-

ment is polluted

Replace all the batteries with new ones.

Install the batteries correctly.

Clean the battery terminals with dry

cloth.

Inflation  stops  and 

reinflate later.

The automatic inflation for ensuring

correct measurement.

Did you talk or move your arm (or

hand) during measurement?

See <AUTOMATIC INFLATION>.

Keep quiet and silent during the

measurement.

The reading is extre-

mely low or high.

Is the cuff at the same level as the

heart?

Is the cuff wrapped right?

Did you strain your arm during

measurement?

Did you talk or move your arm (or

hand) during measurement?

Make sure that your posture is right.

Wrap the cuff correctly.

Relax during measurement.

Keep quiet and silent during the mea-

surement.

Pulse rate is too low or

too high.

Did you talk or move your arm (or

hand) during measurement?

Did you make measurement right 

after exercise?

Keep quiet and silent during the mea-

surement.

Take measurement again after resting 

for more than 5 minutes.

The batteries are run

down soon.

Faulty batteries are used.

Use alkaline batteries of known manu-

facturers.

ENGLISH

Summary of Contents for 32803
















Reviews: