background image

16

3. Press again, the display will show ‘01’, which means the latest reading, then turns to another screen 

to show readings and measuring time as Fig.15;

4. Press again, the display will show ‘02’, which means the second to the latest reading…

Memory clearance

After a measurement is finished or when the device stands by, hold down button ‘M1’ or 

‘M2’ for at least 5 seconds, the display will show ‘CLR’ which means the stored reading 

for ‘M1’ or ‘M2’ is removed.

IRREGULAR HEARTBEAT DETECTOR

Model Domino digital blood pressure monitor provides a blood pressure and pulse rate 

measurement even when an irregular heartbeat occurs. When the device detects the 

irregular heartbeat or any excessive body movement during measurement, the ‘IHB ’ 

icon will display in the LCD. It is important that you be relaxed, remain still and do not 

talk during measurement.

Note: We recommend contacting your physician if you see this ‘IHB’ indicator frequent-

ly.

ERROR AND LOW BATTERY INFORMATION

CARE, STORING, REPAIR AND RECYCLING

1. It’s necessary to protect this device against high moisture, direct sunlight, shock, solvent, alcohol and 

gasoline.

2. Remove the batteries if the device is to be stored for a long time, and keep the batteries far from the 

children.

3. Keep the cuff from sharp subject and don’t extend or twist the cuff.

4. Use only soft and dry cloth to clean the device.

5. The cuffs are sensitive and must be handled with care. You can clean the cuff cover with damp cloth.

WARNING: Under no circumstances may you wash the inner bladder!

6. It is necessary to consult specialists yearly for checking technical condition of the device. Please 

consult your dealer for more information.

INDICATION

POSSIBLE REASON

CORRECTION METHODS

The cuff is put on wrongly or the tube 

plug is inserted too loosely.

Make sure that cuff is put on correctly 

and the tube plug is inserted tightly and 

repeat the measurement.

Movement of arm/hand or talking during 

measurement.

Repeat the measurement with following 

completely recommendations of ma-

nual.

The  cuff  is  not  inflated  to  necessary 

pressure.

Repeat the measurement with pumping 

cuff on 30-40 mmHg above expected 

systolic pressure.

The batteries are weak.

Replace all 4 batteries with new ones.

ENGLISH

Summary of Contents for 32803
















Reviews: