13
ENGLISH
5. The mark <INDEX> on the cuff must point to area <NORMAL> (22-32
cm).
This means the cuff size is correct. If mark <INDEX> points to the area
beyond area <NORMAL>, please consult your dealer whether you need
another size cuff.
6. Sometimes it is difficult to make the cuff regular owning to the shape of the
user’s upper arm, the cone-shape assembly of cuff is also acceptable.
7. If your clothes restrict blood circulation of your upper arm, or you roll your
sleeve up so as to result in such restriction. Please take off your clothes to
get accurate measurement if necessary.
ASSEMBLY THE STORAGE CASE
1. Three hooks of storage case aim at the concaves of device respectively;
2. Push the storage case upwards;
3. To fill tightly with the plug.
SETTING THE DATE AND TIME
The function provides accurate measuring time for each measurement.
To get accurate date and time, the user should preset the date and time correctly before the first use of
this device.
The operation procedure for presetting Date/Time is as follows:
1. When the device is connected to power supply at first time,the display will show as Fig. 1;
2. Press button ‘F’, and the year number flashes;
3. Press button ‘M1’ or ‘M2’ to subtract or add the number, and press button ‘START’ for confirmation;
4. When the year setup is finished, the month number will flash automatically as Fig.3. Please follow the
same instruction as above to set month, date and time;
5.Press button ‘START’ to finish setup. If you want to change the date and time, please repeat proce-
dure 2.3.4.
FUNCTION OF REMINDERS
Setting reminders
This monitor has 3 reminder alarms. You can set 3 different reminder alarms within a
24 hours period.
1. When the device stands by, press button ‘F’ two times to enter into alarm 01 mode,
the display will show as Fig.4;
2. Press button ‘M1’ or ‘M2’ the display will show as Fig.5 and at the same time the hour
number flashes;
