background image

11

PRINCIPLE OF OPERATION

This device adopts the oscillometric technology with Fuzzy Algorithm measuring the arterial blood pres-

sure and pulse rate. The cuff is wrapped around the arm and automatically inflated by the air pump. The 

sensor of the device catches weak fluctuation of the pressure in the cuff produced by extension and 

contraction of the artery of the arm in response to each heartbeat. The amplitude of the pressure waves 

is measured, converted in millimeters of the mercury column, and is displayed by digital value.

Annotation: This device can not provide reasonable accuracy if used or stored in the temper-

ature or humidity beyond the range stated in the section <SPECIFICATIONS> of this manual.

TIPS UN TAKING BLOOD PRESSURE MEASUREMENT  

1. Generally arterial blood pressure is lower in summer and higher in winter. Arterial blood pressure 

changes with atmosphere pressure and is affected considerably by many factors, e.g. physical loads, 

emotional  excitability.  stress,  meals,  etc.  Medicines,  drinking,  smoking  affects  greatly  the  level  of 

individual blood pressure. Blood pressure will raise in low temperature, so it is better to take blood 

pressure measurement in room temperature (approximately 20°C). If this device was stored in low 

temperature, it is necessary to leave it in room temperature for at least 1 hour, otherwise the meas-

urement can be inaccurate. Blood pressure does vary with age and individual, and it is recommended 

to write down the readings in blood pressure record daily, then you can check with your doctor to find 

out what is “normal blood pressure” for you.

   

The illustration is from British Hypertension Society

 

2. Take measurement under doctor’s instruction for patients with cardio-vascular diseases.Under no 

circumstances should you alter the dosages of any drugs prescribed by your doctor! 

3. Accurate measurement of blood pressure may be difficult in serious arteriosclerosis, weak pulse, or 

in patients with obvious fluctuation of heart contraction rhythm. Please consult qualified physician 

interpret your blood pressure readings.

4. Measurement should be conducted in quiet environment. Don’t eat or smoke before a measurement.

This device is supplied with the standard cuff which is fit for the arm size 22-32 cm. Children and 

adults with cuff size fall outside the range 22-32 cm should select special size cuffs. Piease contact 

the dealer to get these special size cuffs.

ATTENTION: Do not use cuff other than the original cults contained In this kit

5. Repeated measurements with interval at 3 minutes are recommended, s you can calculate the aver-

age to get more accurate measurement. Atherosclerosis patients are required longer interval (10-15 

minutes) as elasticity of patients‘ vessels decreased significantly in these diseases. 10-15 minutes 

interval is also applicable for patients suffering from diabetes for a long time

BATTERY INSTALLATION

1. Open the battery cover and then open the button battery cover, then install one ‘CR2025’button bat-

tery into the button battery compartment;

2. Close the button battery compartment cover;

3. Install four ‘AA’ type batteries into the battery compartment as indicated. Make sure that the polarity 

is correct; batteries can be shorter than the recommended;

4. Close the battery compartment cover.

-  Inbuilt button battery for keeping the date/time uninterruptedly during changing the batteries (4x AA 

batteries).

  If the new batteries are installed into the device, the date and time displays ‘01/01’ and ‘00:00’ icon in 

the LCD, it indicates that you need change the new button battery.

ENGLISH

Summary of Contents for 32803
















Reviews: