11
ASPEC® POSITIVE PRESSURE MANIFOLD
|
USER'S GUIDE
INTRODUCTION
Figure 2
Standard Components of the ASPEC™ Positive Pressure Manifold without Shield
Flow Adjustment Locks
Used to lock in flow
adjustments made with the
low and high flow regulator
knobs. Refer to
page 13
.
High Flow
Adjustment Knob
Used to fine tune flow
when
High Flow
is
selected on the SPE
control dial. Refer to
page 13
.
Low Flow
Adjustment Knob
Used to fine tune
flow when
Low Flow
is selected on the
SPE control dial.
Refer to
page 13
.
Manifold
Positioning Lever
Raises and lowers the
manifold over the SPE
cartridge holder. The
manifold locking level
must be unlocked to
move this lever.
Refer to
page 14
.
Locator Plate
Refer to
page 14
for a
detailed description.
Thumbscrews
Manifold
Retaining Clip
Holds the manifold
in place. Refer to
page 20
.
Manifold
Available in three
configurations: 15- or
24-cartridge holders and
96-well plate holders.
