Gillette SPH-120, Operation And Installation Manual

Page: 28 / 30

PAGE 28
SERVICE SCHEDULE
SYSTEM COMPONENT OR
PROCEDURE
SEE
PAGE
CHECK CHANGE
CLEAN TEST FREQUENCY
ENGINE
AIR CLEANER X X R YEARLY OR EVERY 100 HRS.
SPARK PLUG X X X YEARLY OR EVERY 250 HRS.
VIBRATION ISOLATORS X YEARLY
FUEL PIPING X YEARLY
GENERATOR
EXERCISE (RUN) GEN-SET X WEEKLY
ROTOR AND STATOR* X YEARLY
VIBRATION ISOLATORS X YEARLY
LUBRICATION
OIL LEVEL X MONTHLY
CHANGE OIL ** X EVERY 100 HRS
REPLACE FILTER ** X EVERY 150 HRS
BATTERY
TERMINAL CORROSION X X EVERY 6 MONTHS
TIGHTEN TERMINALS X EVERY 6 MONTHS
VOLTAGE OUTPUT X X EVERY 6 MONTHS
ELECTROLYTE LEVEL X EVERY 6 MONTHS
FUEL
FLEX LINES X YEARLY
FUEL LINES X YEARLY
CONNECTOR JOINTS X YEARLY
EXHAUST
MUFFLER X EVERY 6 MONTHS
SPARK ARRESTOR X EVERY 6 MONTHS
FLEX LINE X EVERY 6 MONTHS
LEAKAGE X EVERY 6 MONTHS
JOINT CLAMPS X EVERY 6 MONTHS
COOLING
AIR SCREENS X X YEARLY
LOUVERS X X YEARLY
CLEAN * (SALT SPRAY AREAS)
HOUSING EXTERIOR X X EVERY MONTH
ENGINE LINKAGE X X EVERY MONTH
GEN/ENG EXTERIOR X X EVERY MONTH
COMPLETE ENG TUNE-UP *** BY AUTHORIZED REPAIR PERSONNEL YEARLY
* Contact nearest repair station. ** Recommended oil filter and air filter changed after first 20 hours operation.
Change filters every 50 hours of operation for dusty, dirty environment, or constant high ambient temperatures.
*** Complete engine inspection and maintenance items replaced by authorized repair service, on a regular
scheduled maintenance program.