Gill Instruments Ltd
_____________________________________________________________________________________________________________
__________________________________________________________________________________________________
MaxiMet
Page 120
Issue 3
Doc. No. 1957-PS-021
May 2018
To stop logging:
Click on the Logging button on the MetView console. Clear the Enable Logging
check box.
Click on the OK button. If logging has stopped, the Logging button shows a red-
background cross instead of the green-background tick (see above).
An example of the logged MaxiMet data .log file opened by Notepad is shown below:
7.3.
Use a Terminal Program to View the MaxiMet Data String
There are many terminal programs that might be used to view the MaxiMet data string, e.g.
HyperTerminal, Putty, Tera Term etc.
If, for example, Tera Term is used:
1.
Open Tera Term.
2.
Select Serial.
3.
Select MaxiMet connected COM port.
4.
Click on OK.