Gill GMX100 User Manual Download

Page: 112 / 144

Gill Instruments Ltd

_____________________________________________________________________________________________________________

__________________________________________________________________________________________________

MaxiMet

Page 112

Issue 3

Doc. No. 1957-PS-021

May 2018

VIEWING MAXIMET DATA STRING

7.1.

Use MetSet to View the MaxiMet Data String

Install MetSet software V2.12.01 onwards on to a PC from the supplied CD or download MetSet from the
Gill website at:

http://gillinstruments.com/main/software.html

MetSet software allows you to view the MaxiMet data string graphically. Before you can use MetSet, check
that MaxiMet is correctly connected to a Serial COM port or USB COM port on your PC.

Notes: MetSet is compatible with RS232 and RS422 connected units set for ASCII and NMEA output only.

MetSet will not read SDI-12 or Modbus data strings.

Opening MetSet

Click on the MetSet Connect and Read button. MetSet will display the Editing screen.

Click on View Output button.

The MaxiMet data string will be shown.

Note: This terminal program can only read MaxiMet data it cannot be used to send commands to the

MaxiMet.

Summary of Contents for GMX100

















































































































































Search results

Summary of Contents for GMX100

Reviews:

Related manuals for GMX100

Brands by name

Popular brands

Gill GMX100, User Manual

Search results

Summary of Contents for GMX100

Reviews:

Related manuals for GMX100

Brands by name

Popular brands