Gill Instruments Ltd
_____________________________________________________________________________________________________________
__________________________________________________________________________________________________
MaxiMet
Page 115
Issue 3
Doc. No. 1957-PS-021
May 2018
7.2.3 The MetView Console
When connected correctly, MetView displays its data-monitoring console. This consists of gauges for all of
MaxiMet enabled parameters.
Buttons beneath each of the gauges allow you to choose the displayed units and other options. Each gauge
also shows the maximum and minimum values recorded during the current session. The wind speed gauge
also shows the maximum gust speed.
Note: MetView will not show data if the unit is set for Modbus or SDI-12 format.
An example MetView screen (part of) is shown below (GMX600 default output).
Connection status indicators
Reading
Function
Green Background Tick
Indicates that the MaxiMet is logging or communicating with MetView
correctly, as well as reading the MaxiMet firmware version.
Red Background Cross
Indicates that the MaxiMet is not logging or connected/communicating
with MetView.
1.00Hz
Indicates the output rate of the MaxiMet when connected. Reads when
the unit is communicating correctly with MetView.
Wed 05 Aug 2015 12:34:45 Real time PC date and time indication.
Remaining MetView GMX600 default output screen shown below
Notes: No gauges are associated with the above digital readouts.
The order in which the instruments are shown in the MetView display reflects the order in which
the instrument data appears in the MaxiMet data string.