GILES GHM-4, Operation & Service Manual

Page: 36 / 56

26
Operation Model: GHM Warmer Series
1. Ensure the Front Curved Glass is lowered to the fully closed position and Sliding Doors are closed.
2. Place Main Power Switch
①
in the [ON] position.
3. Turn all TOP HEATER control knobs
②
counter-clockwise to [HI] and set all BOTTOM HEATER controls
③
to the
[10] setting; the Indicator Lights
④
come on. Allow the unit to preheat approximately 15 minutes .
4. When the Bottom Heater Indicator Lights go out, proceed to the next step (Top Heater Indicators remain ON) .
The GHM and its parts become HOT! Temperatures inside the unit may exceed 150°F (65.6°C). Exercise caution
when operating, loading/unloading food, cleaning or servicing. Use of thermal oven mitts or gloves is advised.
Separate Temperature Control Panels are provided for each “pan well zone” ... GHM4 = 3, GHM5 = 4, GHM6 = 5,
GHM8 = 7. Main Power/Light Switch is located on the right-hand panel only.
DO NOT touch the ceramic Top Heaters. They are extremely HOT and skin contact may result in a serious burn.
4.02 Setting & Adjusting Warmer Temperature
4
1
3
2
Continued on Next Page