GILES GHM-4 Operation & Service Manual Download Page 45

Page: 45 / 56

Parts List

Model: GHM Warmer Series

Parts List

This section lists some of the various parts that are available for replacement on the unit. This is not an all inclusive

listing; please contact an authorized

Giles

representative or service agent concerning other parts that may be replaced

in the field.

7.01

Parts Ordering & Service Information

Our goal at Giles is to provide the highest possible quality of service and assistance. To help us accomplish this, please

have the following information readily available when calling, along with a brief description of the problem being

experienced. Please record the unit information in the table below for quick reference.

The information can be found on the

Serial/Data Label located here.

IN THE UNITED STATES & CANADA call:

800.554.4537

ALL OTHERS call:

334.272.1457

Normal business hours are 8:00 AM to 5:00 PM Central Time ... calls are handled by an auto-attendant answering

system. Please follow the recorded prompts to route your call appropriately. If necessary after hours, leave a

voicemail message and a representative should respond within 30 minutes.

Website:

www.gfse.com

Email:

[email protected]

If assistance or repairs are required, please contact a

GILES

Manufacturer’s Representative to assist with locating an

authorized service provider in your area. For further assistance you may contact the

GILES Technical/Customer Service

Support

as follows:

Model:
Serial Number:
Voltage:
Phase:

Summary of Contents for GHM-4

























































Search results

Summary of Contents for GHM-4

Reviews:

Related manuals for GHM-4

Brands by name

Popular brands

GILES GHM-4, Operation & Service Manual

Search results

Summary of Contents for GHM-4

Reviews:

Related manuals for GHM-4

Brands by name

Popular brands