GILES GHM-4, Operation & Service Manual

Page: 19 / 56

9
Installation Model: GHM Warmer Series
• Exercise care when lifting and moving unit onto counter.
• Ensure that the counter base and/or counter-top is capable of supporting the weight of the unit and the food
products to be displayed. See Section1-4.4, Unit Weights.
5. Secure unit by fastening Plate Mount Legs to counter-top with appropriate screws (not supplied) .
Front Floor Plate Leg
Rear Floor Plate Leg (2) Screws (supplied
by customer) for each
Floor Plate Leg.
1. The GHM Warmer may also be installed on an appropriately sized custom or pre-
fabricated base counter (GILES offers several different styles of stainless steel Bases,
specifically designed for GHM Series Warmers) . Prior to installing the unit ensure that
the base counter is level and stable.
2. The unit must be attached to the counter in accordance with local building code and/or
applicable health and sanitation code. Some health codes require that cracks and
space between appliance and base, and base and floor must be sealed to eliminate
potential harborage for pests. It is the responsibility of the purchaser and their
contracted installer to ensure that all applicable code and regulation requirements are
met.
IMPORTANT!
GILES assumes no responsibility for code compliance with respect to installation and use of this equipment.
2.03 Counter-Top Installation - continued
2.03.1 Base Counter Installation