GILES EOF-BIB/FFLT/24/24 Manual Download Page 94

Page: 94 / 124

Cleaning

EOF-BIB/FFLT/24/24

Cleaning

Continued next page

This section explains cleaning procedures for the EOF Model Banked Fryers. General cleaning should typically be

performed daily, other specific procedures should be performed as stated.

•

DO NOT wash down the interior or exterior of the unit with water from a spray hose.

•

Failure to comply with these DANGER notices will result in death or serious injury, equipment or property

damage, and void the warranty.

This section explains how to clean the Fry Vats; this process is referred to as Boil-Out. The Boil-Out process must be

performed before the first use of new equipment, and should be performed each time after disposing of used

cooking oil, prior to refilling the vat with fresh oil.
For proper fryer maintenance and operation, the Boil-Out procedure should be performed every 7 to 14 days.

1. Remove shortening from the unit, see

Section 5-05, Removal of

Waste Cooking Oil from Fryer

2. Ensure the Drain Valve Handle

①

is pushed in and locked in the

CLOSED

position and the Power Switch

③

is in the

OFF

position.

3. Fill the Fry Vat with clean water to the

FULL

level mark

②

4. Follow the use instructions of the Boil-Out Cleaner product being

used, add the recommend amount of product to water and stir to

mix.

Boil-Out Cleaner is available from Giles, part number 72003

(case of 4, 8-lbs containers), or 72003-1 (single 8-lb container).

DO NOT, under any circumstances, leave the fryer unattended during this procedure. It may become necessary

to adjust heat settings to avoid vat overflow. Overflow may result in serious equipment damage.

Closely adhere to the cleaning product

manufacturer’s usage instructions. Many

commercially available fryer cleaning products contain caustic

chemicals and require special precautions when used. Improper

use, may damage the fryer, and also present potential for

personal injury.
Alway wear rubber gloves when working with clean solution.

6-01.

Boil-Out Procedure (Cleaning a Fry Vat)

Summary of Contents for EOF-BIB/FFLT/24/24





























































































































Search results

Summary of Contents for EOF-BIB/FFLT/24/24

Reviews:

GILES EOF-BIB/FFLT/24/24, Manual, Page: 94 / 124

Search results

Summary of Contents for EOF-BIB/FFLT/24/24

Reviews: