GILES EOF-BIB/FFLT/24/24 Page 67 Manual Download

Page: 67 / 124

Fryer Operation

EOF-BIB/FFLT/24/24

5-01.6

The Cooking Cycle, General Overview

The temperature

SETPOINT

MENU NAME

, and

COOKING TIME

currently

selected for each Basket side are shown on the

OLED Display

When in

READY

state the Temperature setpoint is shown on

7-Segment Display

The

READY

message indicates that the cooking oil is at proper temperature and

the Fryer is ready for cooking.

To start the cook cycle press the

[START]

key once.

Prompt is displayed to select which Basket side is to start. Use keypad to select

...

LEFT - BOTH - RIGHT

A different Cook Timer can be stated for the other Basket if desired. To start the

cook cycle press the

START

key once.

Prompt is displayed to select the other Basket side. Press the appropriate

arrow key

[4]

[6]

to start the other Timer. The

7-Segment Display

and the

Timer Indicator

will change to the timer started.

When both Timers are cooking and counting down, pressing the

TIME

key twice

will swap the

7-Segment Display

between Timers.

Timer Indicator

will change

to reflect the active timer.

x 2

Continued on Next Page

EOF24, SINGLE DISPLAY

After selecting the Basket side, Controller enters

COOK

state. If the Fryer is

equipped with automatic Basket Lifts, the Basket will be lowered into the

cooking oil and the programmed Menu Cooking Time will begin counting down

on the

7-Segment Display.

The

OLED Display

shows which side’s cycle is

cooking, as well as displaying the programmed setpoint temperature. If both

side are cooking, the display indicates

BOTH

. The

Timer Indicator

for the timer

being displayed will be illuminated.

Summary of Contents for EOF-BIB/FFLT/24/24





























































































































Search results

Summary of Contents for EOF-BIB/FFLT/24/24

Reviews:

Related manuals for EOF-BIB/FFLT/24/24

Brands by name

Popular brands

GILES EOF-BIB/FFLT/24/24, Manual

Search results

Summary of Contents for EOF-BIB/FFLT/24/24

Reviews:

Related manuals for EOF-BIB/FFLT/24/24

Brands by name

Popular brands