GILES EOF-BIB/FFLT/24/24 Page 59 Manual Download

Page: 59 / 124

Fryer Operation

EOF-BIB/FFLT/24/24

5-01.3

Setting the Cooking Temperature

Press the

[TEMP]

key

Use keypad to

enter cooking

temperature

setpoint (

F).

Ex: 325 = 325

Press the

[START]

key to input the

setpoint.

NOTE:

Pressing the

[TEMP]

key twice (2x) will display the actual oil temperature for 20 seconds.

The default unit for Temperature is

... this can be changed in

USER SETTINGS, see Section 5-01.8.

Cooking temperature setpoint is always input manually as shown below.

Menu Item presets in the Controller do

not contain a cooking temperature setting

Instructions will be shown on the

OLED Display

to help guide User through the process.

● If actual oil temperature is lower than the entered setpoint temperature when

[START]

is pressed, the Controller

enters

PREHEAT

mode (red

HEAT

indicator beside

7-Segment Display

turns

). Before oil will actually begin

heating, the

Heat Switch must be placed in the [HEAT] position

; the amber

HEAT

indicator on the Fryer Control

panel should turn

● If the oil temperature is already equal to or greater than the entered setpoint, an alarm sounds and the message

SETPOINT REACHED

is displayed. Press the

[ALARM]

key and the Controller will enter

READY

state. Fryer is ready

for cooking.

While heating, the real-time actual oil temperature will show on the

7-Segment Display

. After setpoint is reached,

the display shows the temperature setpoint.

Summary of Contents for EOF-BIB/FFLT/24/24





























































































































Search results

Summary of Contents for EOF-BIB/FFLT/24/24

Reviews:

Related manuals for EOF-BIB/FFLT/24/24

Brands by name

Popular brands

GILES EOF-BIB/FFLT/24/24, Manual

Search results

Summary of Contents for EOF-BIB/FFLT/24/24

Reviews:

Related manuals for EOF-BIB/FFLT/24/24

Brands by name

Popular brands