MDE-5386D Hybrid Card Reader S (HCRS) Kit (M13940KXXX) Installation Instructions (Canada) · June 2020
Page 11
Installing HCRS Kit in Encore 300/500 Units
4
From the rear of the main door, position the HCRS and then the card reader bracket on the
door so that the opening on the bracket is positioned at the top. Loosely secure the card reader
bracket and HCRS to the main door using the four Q11677-24 (or M14757B001 for threaded
insert doors) Screws provided in the kit.
Note: When installing the card reader bracket onto the HCRS, the lip on the bottom of the
card reader bracket must face toward you (toward the data/power connector).
Figure 4: HCRS Mounted on Encore 300/500 Units
P206 Connector on the SIP board.
Cable from the HCRS is connected
here.
HCRS
Connector on the HCRS. HCRS cable is connected to the SPOT,
SIP, and door node or display board.
SPOT Display Unit
Cable from the HCRS is
connected to the card
reader port on the
SPOT
Card Reader Bracket
Notes: 1) The image shown is sample only. SIP may be located in different location.
2) Ensure that the card reader cable is installed onto the card reader before mounting the card reader to the dispenser.
