Page 10 MDE-5386D Hybrid Card Reader S (HCRS) Kit (M13940KXXX) Installation Instructions (Canada) · June 2020
Installing HCRS Kit in Encore 300/500 Units
2
Inspect the bosses on the door before installing the card reader. If the door has stripped bosses,
it is required to replace the CIM door (see
).
Figure 2: Examples of Good and Stripped Bosses
(i)
(ii)
Good Boss
Stripped Boss
3
Place the non-adhesive gasket over the front of the card reader and ensure that the gasket is
seated on the flange and covers the dismount buttons as shown in
Note: Installing this non-adhesive gasket is different from previous gasket installation. It is
laid over the card reader snout first, and then the card reader is inserted into the card
reader opening on the door. In this application, the card reader becomes your insertion
tool.
Figure 3: HCRS in Encore 300/500 Units
(i)
Front View
(ii)
Side View
Gasket
Card Reader
