73
Using several handsets
Gigaset S675 IP / ALGERIAN eng / A31008-M1915-A751-1-3T19 / T-NetBox_SAG-registration.fm / 27.10.08
Ve
rsion 4, 16.09.2005
Using several handsets
Registering handsets
You can register up to six handsets to your
base station.
You can register your Gigaset S67H hand-
set on up to four base stations.
Registering another Gigaset S67H
handset on the Gigaset S675 IP
Before you can use your handset, you
must register it to a base station.
You must initiate handset registration on
the handset and on the base station.
If the handset has been registered suc-
cessfully, the handset returns to idle sta-
tus. The handset's internal number is
shown in the display e.g.
Int 1
. If not,
repeat the procedure. Registration can
take up to one minute.
¤
Select
v
¢
¢
Handset
¢
Register H/Set
on the handset.
¤
Enter the system PIN of the base station
(the default is 0000) and press
§OK§
. The
display shows e.g.
Base 1
and flashes.
¤
Within the next 60 seconds, press and
hold
(for approx. 3 seconds) the regis-
tration/paging key (page 2)
on the
base station
.
The handset is given the lowest available
internal number (1–6). If a number of
handsets are registered on the base sta-
tion, the internal number appears in the
display after registration, e.g.
INT 2
. This
means that the internal number 2 was
assigned to the handset.
Registering other handsets on the
Gigaset S675 IP
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
¤
Begin the registration procedure
on
the handset
in accordance with the
handset's operating instructions.
¤
Press and hold (for approx. 3 seconds)
the registration/paging key (page 2)
on
the base station
.
Please note:
– If a number of handsets are registered on
your base station, you can simultaneously
make two calls via the Internet and one via
the fixed line network. Up to two additional
internal connections are also possible.
– Selecting the connection via the talk key
(page 24) is not supported on GAP hand-
sets. Therefore, if you enter a number with-
out a line suffix and without defining a dial-
ling plan for the phone number, it will be
dialled via
enter a "*" (star) at the end of the phone
number, it will be dialled via the non-
default connection.
– After registration, all the phone numbers
for the phone will be assigned to the hand-
set as receive numbers. It will use the fixed
line network number and the first VoIP
number as send numbers. For how to
change the assignments, see page 106.
Please note:
If six handsets are already registered to the
base station, there are two options:
– The handset with the internal number 6 is
in idle status: the handset you wish to reg-
ister is assigned the number 6. The handset
that was previously number 6 is de-regis-
tered.
– The handset with the internal number 6 is
being used: the handset you wish to regis-
ter cannot be registered.
Please note:
You can also make changes on your base sta-
tion with a Gigaset S45 and C47H handset.
