10
First steps
Gigaset S675 IP / ALGERIAN eng / A31008-M1915-A751-1-3T19 / starting.fm / 27.10.08
Ve
rsion 4, 16.09.2005
First steps
Pack contents
The pack contains:
u
one Gigaset S675 IP base station
u
one Gigaset S67H handset
u
one mains adapter for the base station
u
one charging cradle incl. mains adapter
u
one phone cable
u
one Ethernet cable (LAN cable)
u
two batteries
u
one battery cover
u
one belt clip
u
one quick guide
Setting up the handset for use
The display is protected by a
plastic film.
Please remove
the protective film!
Inserting the batteries
¤
Insert the batteries the right way round
(see figure).
The polarity is indicated in/on the battery
compartment.
The handset switches on automatically.
You will hear a confirmation tone.
Closing the battery cover
¤
First, align the notches on the side of
the battery cover with the protrusions
on the inside of the housing.
¤
Then press the cover until it clicks into
place.
Opening the battery cover
¤
If fitted, remove the belt clip.
¤
Place your fingertip in the cavity on the
casing and pull the battery cover
upwards.
Firmware updates:
Your telephone is supplied with the firmware
version 097 or higher.
Whenever there are new or improved func-
tions for your Gigaset IP phone, base station
firmware updates will be made available for
you to download to your telephone (page 88).
If this results in operational changes to your
phone, a new version of this user guide will be
published on the Internet at
Warning:
Only use rechargeable batteries (page 128)
recommended by Gigaset Communications
GmbH*. Never use a conventional (non-
rechargeable) battery or other battery types as
this could result in significant health risks and
personal injury. For example, the batteries
could explode. The phone could also malfunc-
tion or be damaged as a result of using batter-
ies that are not of the recommended type.
* Gigaset Communications GmbH is a trademark licensee of Siemens AG.
