116
Web configurator –configuring phone via PC
Gigaset S675 IP / ALGERIAN eng / A31008-M1915-A751-1-3T19 / web_server.fm / 27.10.08
Directory content (vcf file)
The following data (if available) is written
into the vcf file for entry into the directory
or transferred from a vcf file into the hand-
set directory.
1. Name
2. First name
3. Number
4. Number (office)
5. Number (mobile)
6. E-mail address
7. Date (YYYY-MM-DD) and time of the re-
minder call (HH:MM) separated by a "
T
"
(example: 2008-01-22T11:00).
8. Identification as VIP (X-SIEMENS-VIP:1)
Other information that a vCard may con-
tain is not entered into the handset direc-
tory.
Example for an entry in vCard format:
BEGIN:VCARD
VERSION:2.1
N:Smith;Anna
TEL;HOME:1234567890
TEL;WORK:0299123456
TEL;CELL:0175987654321
EMAIL:[email protected]
BDAY:1975-05-04T11:00
X-SIEMENS-VIP:1
END:VCARD
Activating VoIP status message
display
You can display VoIP status messages on
your handset when there are VoIP connec-
tion problems. These messages give you
information on the status of a connection
and contain a provider-specific status
code that helps the service team when
they are analysing the problem.
¤
Open the following Web page:
Settings
¢
Handsets
.
The settings are carried out in the
Miscellaneous
area.
¤
Click the
Yes
option next to
Show VoIP
status on handset
to activate the status
message display.
If you click
No
, no VoIP status messages
are displayed.
¤
Click
Set
to save the changes.
Starting a firmware update
If necessary, you can load updates of the
base station firmware onto your phone.
The server on which Gigaset Communica-
tions makes new firmware versions availa-
ble for your base station is set by default.
The URL of the Internet server is displayed
in the
Data server
field.
You should only change this URL under
exceptional circumstances (e.g. if
requested to do so due to erroneous
behaviour). This address is also used to
load provider information from the Inter-
net. You should therefore make a note of
the default URL before you overwrite it.
Otherwise, you will only be able to reacti-
vate the default URL by resetting the base
station back to the default settings
Please note:
A table with possible status codes and their
meaning can be found in the appendix on
