Gigaset ONE X5100, Quick Start Manual

Page: 8 / 17

If this controller is the main controller for your network,
resetting it will result in the nodes in your network being
orphaned and it will be necessary after the reset to remove
and add again all of the nodes in the network.
If this controller is being used as a secondary controller in
the network, use this procedure to reset this controller only
in the event that the network primary controller is missing or
otherwise inoperable.
z
Enter the Z-Wave Portal
z
Tab on MORE , then MAINTANACE and then RESET
z
Confirm Reset by choosing CONFIRM and after couple of
seconds the Reset is finished
Z-Wave Factory Reset