Gigaset ONE X5100, Quick Start Manual, Page: 9 / 17

Remark: Gigaset ONE X5100 can be added as the inclusion
controller or the secondary controller. This depends on the
setting of the main controller, please refer to its manual.
z
Make sure no Z-Wave devices are added to your
Gigaset
ONE X5100 controller (only then the learn mode
can be started)
z
Start add Z-Wave device procedure on the main controller
according to its manual
z
Now enter Z-Wave Portal
z
From the menu choose MORE , MAINTANACE and then
SET LEARN MODE to add Gigaset ONE X5100 as an
inclusion / secondary controller
z
After couple of minutes Gigaset ONE X5100 is in the same
network as the main controller
Adding Gigaset ONE X5100 as an
inclusion / secondary controller
z
Enter the Z-Wave Portal
z
Start to add a Z-Wave device like it is described in
"Add a Z-Wave Device via ADD DEVICE"
z
Start learning mode of your inclusion controller according
to its manual
z
After couple of minutes the new device will be in the same
network as Gigaset
ONE X5100
Add an inclusion controller
to your Z-Wave network