Command
Description
crypto
Manage X.509 certificates for the node’s Web server.
debug
Generate a dump file for use in debugging issues with Gigamon Technical Support.
disable
Leave Enable mode and return to Standard mode.
Configure email and event notification via email.
enable
Enter Enable mode.
exit
Leave Configure mode and return to Enable mode or log out of the CLI.
file
Manage TCP and debug dump files on disk.
filter-template
Configures flexible filter templates on GigaVUE-HC3, GigaVUE TA Series-TA100 and
GigaVUE-TA25.
gigasmart
Configures a stack port interface to provide Internet connectivity for a GigaSMART card or
module.
gigastream
Configure a GigaStream – a group of ports acting as a single addressable tool port destination or
stack-link.
halt
Shut down the system without powering it off.
help
View a description of the interactive help system.
hostname
Specify the system's hostname. The hostname appears in the system prompt and in SNMP traps.
ib-pathway
Reserved for future use.
image
Manage system software images.
interface
Configure network interfaces.
ip
Configure IP settings for the eth0 Mgmt port.
ipv6
Configure IPv6 settings for the eth0 Mgmt port.
job
Configure scheduled jobs.
ldap
Configure LDAP server settings for authentication.
license
Activate features using license keys. On GigaVUE TA Series-TA10A ,GigaVUE-TA25A and GigaVUE
TA Series-TA100, use this command to enable additional ports. (GigaVUE TA Series-TA10,GigaVUE
TA Series-TA40, GigaVUE-TA25 and GigaVUE TA Series-TA100-CXP have all ports enabled.)
Use this command to enable clustering on the following TA Series nodes: GigaVUE TA Series-
TA10, GigaVUE TA Series-TA40, GigaVUE TA Series-TA100 and GigaVUE-TA25.
logging
Configure event logging.
map
Configure maps and map rules to manage GigaVUE TA Series traffic distribution.
map-passall
Create a pass-all map to send all traffic on a network port to a tool port irrespective of the other
packet distribution in place on the port.
map-scollector
Configure shared collector map parameters.
map-template
Create a map template.
no
Delete or clear certain configuration options.
notifications
Configures notification settings.
ntp
Enable and disable the use of NTP, as well as add NTP servers.
ntpdate
Set system clock once from a remote server using NTP.
ping
Send ICMP echo requests to a specified host.
Contents
31
GigaVUE-TA25E Hardware Installation Guide
