Gigabyte R271-Z31 User Manual Download Page 128

Page: 128 / 139

BIOS Setup

- 128 -

5-6-3

BMC Network Configuration

Parameter

Description

BMC network configuration

Lan Channel 1

Configuration Address source

Selects to configure LAN channel parameters statically or dynamically

(DHCP). Do nothing option will not modify any BMC network parameters
during BIOS phase.

Options available: Unspecified, Static, DynamicBmcDhcp. Default setting

DynamicBmcDhcp

Station IP address

Displays IP Address information.

Subnet mask

Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example,
192.168.000.001.

Router IP address

Displays the Router IP Address information.

Station MAC address

Displays the MAC Address information.

VLAN Support

Set to BMC enabled/diisabled VLAN.
Options available: Enabled, Disabled. Default setting is

Disabled

Real-time get BMC network
address

Press [Enter] will set LAN mode and Address source and then get IP,
Subnet, Gateway and MAC address.

Summary of Contents for R271-Z31












































































































































Search results

Summary of Contents for R271-Z31

Reviews:

Related manuals for R271-Z31

Brands by name

Popular brands

Gigabyte R271-Z31, User Manual

Search results

Summary of Contents for R271-Z31

Reviews:

Related manuals for R271-Z31

Brands by name

Popular brands