Gigabyte R271-Z31, User Manual

Page: 104 / 139

BIOS Setup - 104 -
Parameter
Description
Target Static Lane Select
Upper 32 bits
This item is configurable when Target Static Lane Control is set to
Enabled .
Target Static Lane Select
Lower 32 bits
This item is configurable when Target Static Lane Control is set to
Enabled .
Target Static Lane Select
ECC
This item is configurable when Target Static Lane Control is set to
Enabled .
Target Static Lane Value
This item is configurable when Target Static Lane Control is set to
Enabled .
Data Eye Type
This item determines which results are expected to be captured for Data Eye.
Options available: 1D Voltage Sweep, 1D Timing Sweep, 2D Full Data Eye,
Worst Case Margin Only. Default setting is
Worst Case Margin Only .
Worst Case Margin
Granularity
Configures Worst Case Margin Granularity.
Options available: Per Chip Select, Per Nibble.
Default setting is
Worst Case Margin Only .
Read Voltage Sweep Step
Size
Configures the step size for read Data Eye voltage sweep.
Options available: 1, 2, 4. Default setting is 2 .
Read Timing Sweep Step
Size
Configures the step size for read Data Eye timing sweep.
Options available: 1, 2, 4. Default setting is 1 .
Write Voltage Sweep Step
Configures the step size for write Data Eye voltage sweep.
Options available: 1, 2, 4. Default setting is 2 .
Write Timing Sweep Step
Size
Configures the step size for write Data Eye timing sweep.
Options available: 1, 2, 4. Default setting is 1 .