background image

BIOS Setup

- 158 -

Parameter

Description

Key Management

Press [Enter] to configure advanced items.

Please note that this item is configurable when Secure Boot Mode is set 

to Custom.

 

Š

Factory Key Provision 

 

– Allows to provision factory default Secure Boot keys when system is in 

Setup Mode.

 

– Options available: Enabled, Disabled. Default setting is 

Disabled

.

 

Š

Restore Factory Keys

 

– Installs all factory default keys. It will force the system in User Mode.

 

– Options available: Yes, No.

 

Š

Enroll Efi Image

 

– Press [Enter] to enroll SHA256 hash of the binary into Authorized 

Signature Database (db).

 

Š

Secure Boot variable

 

– Displays the current status of the variables used for secure boot.

 

Š

Platform Key (PK)

 

– Displays the current status of the Platform Key (PK).

 

Press [Enter] to configure a new PK.

 

– Options available: Update.

 

Š

Key Exchange Keys (KEK)

 

– Displays the current status of the Key Exchange Key Database (KEK).

 

Press [Enter] to configure a new KEK or load additional KEK from 

storage devices.

 

– Options available: Update, Append.

 

Š

Authorized Signatures (DB)

 

– Displays the current status of the Authorized Signature Database.

 

Press [Enter] to configure a new DB or load additional DB from storage 

devices.

 

– Options available: Update, Append.

 

Š

Forbidden Signatures (DBX)

 

– Displays the current status of the Forbidden Signature Database.

 

Press [Enter] to configure a new dbx or load additional dbx from 

storage devices.

 

– Options available: Update, Append.

 

Š

Authorized TimeStamps (DBT)

 

– Displays the current status of the Authorized TimeStamps Database.

 

Press [Enter] to configure a new DBT or load additional DBT from 

storage devices.

 

– Options available: Update, Append.

 

Š

OsRecovery Signatures

 

– Displays the current status of the OsRecovery Signature Database.

 

Press [Enter] to configure a new OsRecovery Signature or load 

additional OsRecovery Signature from storage devices.

 

– Options available: Update, Append.

Summary of Contents for R263-Z32




































































































































































Reviews: