Gigabyte R263-Z32 User Manual Download Page 52

Page: 52 / 163

BIOS Setup

- 52 -

Parameter

Description

BIOS Information
Project Name

Displays the project name information.

Project Version

Displays version number of the BIOS setup utility.

Build Date and Time

Displays the date and time when the BIOS setup utility was created.

BMC Information

(Note1)

BMC Firmware Version

(Note1)

Displays BMC firmware version information.

Processor Information
CPU Brand String/ CPU Speed /
Processor Core / Microcode Patch

Displays the technical specifications for the installed processor(s).

Total Memory

(Note2)

Displays the total memory size of the installed memory.

Memory Speed

Note2)

Displays the frequency information of the installed memory.

VR Information Version

Displays VR version information.

AGESA PI Version
PI Version

Displays AGESA PI version information.

(Note1)  Functions available on selected models.
(Note2)  This section will display capacity and frequency information of the memory that the customer has
  installed.

Summary of Contents for R263-Z32




































































































































































Search results

Summary of Contents for R263-Z32

Reviews:

Brands by name

Popular brands

Gigabyte R263-Z32, User Manual

Search results

Summary of Contents for R263-Z32

Reviews:

Brands by name

Popular brands