manualshive.com logo in svg

Gigabyte R263-Z32, User Manual

Share
Download
Gigabyte R263-Z32 User Manual Download Page 80

BIOS Setup

- 80 -

Parameter

Description

NIC Configuration

Press [Enter] to configure advanced items. 

 

Š

Link Speed

 

– Allows for automatic link speed adjustment.

 

– Options available: Auto Negotiated, 10 Mbps Half, 10 Mbps Full, 100 

Mbps Half, 100 Mbps Full. Default setting is 

Auto Negotiated

.

 

Š

Wake On LAN

 

–

Enables power on of the system via LAN. Note that configuring 

Wake on LAN in the operating system does not change the value of 
this setting, but does override the behavior of Wake on LAN in OS 
controlled power states.

 

– Options available: Disabled, Enabled. Default setting is 

Enabled

.

Blink LEDs

Identifies the physical network port by blinking the associated LED.

Press the numeric keys to adjust desired values.

UEFI Driver

Displays the technical specifications for the Network Interface Controller.

Adapter PBA

Displays the technical specifications for the Network Interface Controller.

Device Name

Displays the technical specifications for the Network Interface Controller.

Chip Type

Displays the technical specifications for the Network Interface Controller.

PCI Device ID

Displays the technical specifications for the Network Interface Controller.

PCI Address

Displays the technical specifications for the Network Interface Controller.

Link Status

Displays the technical specifications for the Network Interface Controller.

MAC Address

Displays the technical specifications for the Network Interface Controller.

Virtual MAC Address

Displays the technical specifications for the Network Interface Controller.

Summary of Contents for R263-Z32




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands