manualshive.com logo in svg

Gigabyte R263-Z32, User Manual

Share
Download
Gigabyte R263-Z32 User Manual Download Page 104

BIOS Setup

- 104 -

5-3-3-3 DDR MBIST Options

 Parameter

Description

 DDR MBIST Options

MBIST Enable

Enable/Disable the Memory MBIST function.
Options available: Disabled, Enabled, Auto. Default setting is 

Auto

.

MBIST Test Mode

(Note1)

Selects MBIST Test Mode. 

Interface Mode

: Tests Single and Multiple CS transactions and Basic 

Connectivity. 

Data Eye Mode

: Measures Voltage vs. Timing.

Options available: Auto, Both, Interface Mode, Data Eye Mode. Default 
setting is 

Auto

.

MBIST Aggressors

(Note1)

Enable/Disable MBIST Aggressor test.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

MBIST Per Bit Slave Die 
Reporting

(Note1)

Enable/Disable to report 2D data eye results in ABL log for each DQ, 
Chipselect, and Channel.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

Data Eye

Press [Enter] to configure advanced items.

Memory Healing BIST

Enable/Disable memory healing BIST.
Options available: Disabled, PMU Mem BIST, Self-Healing Mem BIST, 
PMU and Self-Healing Mem BIST. Default setting is 

Disabled

.

(Note1)  This item appears when 

MBIST Enable 

is set to 

Enabled

.

Summary of Contents for R263-Z32




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands