manualshive.com logo in svg

Gigabyte R263-Z32, User Manual

Share
Download
Gigabyte R263-Z32 User Manual Download Page 152

BIOS Setup

- 152 -

5-6-1  System Event Log

Parameter

Description

Enabling / Disabling Options

SEL Components

Change this item to enable or disable all features of System Event 
Logging during boot.
Options available: Disabled, Enabled. Default setting is 

Enabled

.

Erasing Settings

Erase SEL

Choose options for erasing SEL.
Options available: No/Yes, On next reset/Yes, On every reset. Default 
setting is 

No

.

When SEL is Full

Choose options for reactions to a full SEL.
Options available: Do Nothing, Erase Immediately. Default setting is 

Do 

Nothing

.

Custom EFI Logging Options

Log EFI Status Codes

Enable/Disable the logging of EFI Status Codes (if not already converted 
to legacy).
Options available: Disabled, Both, Error code, Progress code. Default 
setting is 

Error code

.

Summary of Contents for R263-Z32




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands